Wemyss skiff build

http://jordanboats.co.uk/JB/wemyss_skiff.htm

Last section of last plank in place; just need to fit the Keel, Stem and Stern pieces, clean it all up and then turn her over. About half way now.
Gordon & Keith glueing and Mark preparing the Lands and Gains (or “geralds” ). See here if you are interested in the background of the techniques … https://en.wikipedia.org/wiki/Clinker_(boat_building)#Planking
12/12/2019; 2nd planks in place. Quite cold in the workshop today; I hope the epoxy sets. Note the cable ties used to hold the plank gains; Mark’s idea and it works well.
Keith and Mark preparing the Gains and Lands on the Garbord strakes ready for the next planks
  • Planks are joined with glued “scarf” joints. We use a jig to give a 1 : 8 chamfer using a router. The tricky bit is holding the plank flat without it moving (or the wedges deforming the cross-bar)